|
Industrial Products
| We offer to our clients a large number of Products, Entertain Turnkey Solutions of various plants and also in the Trade Business of Hardware and Mill Stores. With our vast industry experience and in depth knowledge of the industry, we offer the highest performing product range to our clients, which is made after conducting lot of research and development. The range we offer to our clients include : |
 
 |
Industrial Blowers Available as FD / ID / Axial Fans. These are available in following categories.
I. Double Stage Extra High Pressure Blowers / FD Fans
Such blowers are designed in double stage/multi empeller enabling to produce extra high pressure upto 1500 WG pressure but having low volume i.e. 300 CFM. to 2000 CFM, are applicable for oil fired burners to create proper atomization and complete combustion of oil, forced air cooling, pneumatic conveying and liquid agitation. Made out of MS fabricated, direct drive, power consumption 10 HP to 100 HP.
II. Single Stage High Pressure Blowers / FD Fans
High pressure force draft fan having pressure up to 1100 mm WG and volume Capacity 200 CFM to 1000 CFM are applicable for oil fired Burners to make proper atomization and complete combustion of oil, other fuel firing, forced air cooling and into the forced conveying systems. Construction generally made out of MS fabricated, direct drive and power consumption 2 HP to 30 HP.
III. Medium Pressure Blowers The Medium pressure combustion Blowers having Pressure 500 mm to 800 mm WG and volume capacity 1,000 CFM to 20,000 CFM , are applicable for the proper combustion of fuel like coal & wood etc. and are used in cupolas furnaces, boilers and ovens etc. Made out of MS fabricated, in direct drive, power consumption 5 Hp to 50 HP. |
Send Your Enquiry  
Suction Blower or Induced Draft Fan I. Medium Pressure I. D. Fan / Suction Blower
These are high volumetric but medium pressure blowers which are used to suck the hot air, polluted gases and are also used for the material handling purposes through pneumatic force.
Construction made out of MS, stainless steel and FRP, in-direct drive having pressure 200 to 500 wg and capacity 2000 cfm to 40,000 cfm ant* high volumetric suction blower.
II. Low Pressure and High Volumetric Suction Blower
These are also high volumetric but low pressure blowers having 50 mm to 200 mm wg pressure and 20,000 cfm to 1,60,000 cfm volume capacity which are used to suck the Fumes, some times are called fume exhauster. Moreover, these are used in chemical industries and are also used for ventilation purposes.
MS and stainless steel fabricated blowers are constructed in steel and are used in general and some chemical industries whereas the FRP fabricated body (supported with steel structure duly insulated) and the impeller made out of PP Sheet made blowers are used in special type of chemical and acidic industries. These blowers are designed in direct drive through V Belt and pulley system is almost applied. |
|
Send Your Enquiry
|
Axial Fan / Fume Exhauster We offer Axial Fan / Fume Exhauster as per the following features:
• Construction Mode: C. I. casting, M.S and stainless steel fabricated body
• Size: 500 mm to 1200 mm
• Power Required: 7.5Hp to 100 Hp
• Applications: Chemicals, pigments, red lead, litharge, spices and other such grinding & crushing industries. |
Send Your Enquiry
Pulverizer Our range of Pulverisers come with the following specifications:
• Construction Mode: C. I. casting , M.S and stainless steel fabricated body
• Size: 500 mm to 1200 mm
• Power Required: 7.5 Hp to 100 Hp
• Applications: Chemicals, pigments, red lead, litharge, spices and other such grinding & crushing industries. |
|
Send Your Enquiry
|
Power Press We manufacture and supply Power Press asper the following specifications:
Double Pillar, Inclinable & Non Inclinable Power Presses
• Frame: Mild steel heavy duty fabricated body
• Ram Slide: Heavy duty cast Iron proper alignment duly scraped
• Fly Wheel: Properly balanced
• Stroke: Adjustable as desire
• Break: Powerful spring compensated
• Capacity Measure: 10 M ton to 500 M ton
• Power Required: 1 HP to 50 HP
• Applications: Precious processing industries |
Send Your Enquiry
Electric Hoist & Cranes Our range of Electric Hoist & Cranes come with the following features:
I.Beam Hoist
• Capacity: 1 M . Ton to 5 M ton
• Operation: Left-right and up-down
• Lifting Measures: On choice
• Application: To lift up and carry the job straight left and right on single track
II. E.O.T. Crane
• Capacity: 2 M Ton to 50 M ton
• Operation: Reverse-forward, left-right and up-down
• Operate Measures: On choice
• Applications: To lift up and carry the heavy job throughout into the shed. |
|
Send Your Enquiry
|
Oil and Chemical Storage Tanks By making use of qualitative raw material such as mild steel and stainless steel we manufacture oil and chemical storage tanks. These tanks are sturdy on design and available in various shapes and sizes as per the customer specifications and requirements. Our products are used in chemical, alcoholic industries, petroleum retail outlets for the storage of fuel, water, oil, liquids and chemicals. Following are the specifications of our storage tanks :
- Mounting : Under ground, above ground and overhead
- Construction : M.S. or stainless steel fabricated
- Design : Horizontal -Cylindrical and verticals, cylindrical
- Capacity : As required
|
Send Your Enquiry
Lead Smelting Rotary Furnace Lead Smelting Rotary furnace is used for the recovery of lead out of lead-acid battery scrap, lead concentrate and lead ore. We provide the oil fired rotary furnace plant with maximum production efficiency and least production cost i.e. labour, fuel and power consumption. (Production Capacity may 3 M. Ton to 15 M. Ton per day i.e.24 hrs.)
The plant is provided along with the efficient pollution control system also. |
|
Send Your Enquiry
|
Lead Sub Oxide , Red Lead & Litharze Plants Lead Sub Oxide Ball Mill
The construction of Lead Sub Oxide Ball Mill Plant is a cylindrical shell with both conical end rotate through a dearth gear fitted on it and bearing drive mounted upon a heavy duty fabricated foundation stand which is driven through the driving system provided there. The Lead small balls are loaded there in, where a friction heat is generated while rotate. As the temperature raised upto 120 degree C., the oxidation process of lead is started and lead sub oxide becoming separate from the lead balls and so on which taken out through sucking through a suction blower & system provided there by developing the pneumatic force. We manufacture the Ball Mills having capacity from 1 M. Ton. to 12 M Ton per Day / 24 hrs.
Lead Sub-oxide Barton Mill Plant
The construction of Barton Mill Plant is a empty reaction pot having a stirrer in it and the stirrer Arms cum blades made out of stainless steel fitted to the stirrer shaft giving very minor space between the blades and bottom plate of the reaction pot. The reaction pot is preheated and a few molten lead is poured into the pot where the rotating stirrer helps to react the oxidation process between the lead and oxygen taken from the space. This way the lead sub-oxide is generated therein the pot which is taken out by sucking through the system provided. We manufacture having Capacity 6 M. Ton to 20 M. Ton per day.
Red Lead Furnace Plant
L.S.O is further cooked in a totally enclosed type funace pot having a stirrer in it with driving attachment , properly leakage proof , provided thereunder vertical downward the furnace platform. The construction of furnace pot and stirrer may be out of MS or Stainless Steel.
Capacity : 1000 Kg to 2500 Kg per batch
Litharge Furnace Plant The construction is quite same as of The Read Lead but can be designed only in Stainless Steel. Capacity : Upto 1000 Kg |
Send Your Enquiry
Copper / Brass / Aluminium Melting Refinery Plant I. Non Chemical Refining Hydraulic Tilting Copper Furnace (Super-D type):
This is the Super-D type, Hydraulic Tilting, direct oil fired & non-chemical refining furnace for copper. It may be shaped either one end conical or having both end Blind like a drum. An another type of semi rotary Drum shaped, movable on wheels Hydraulic operate for discharging is also designed.
We manufacture & install these furnaces 5 to 20 M. ton capacity on TURN KEY.
II. Chemical Refining Hydraulic Tilting Copper Furnace Zero % Impurity:
This Type of Furnace is such designed to make more suitable to put and mix the chemicals into the furnace for refining of copper. Apart of Copper the Brass can also be prepared and Re-melt in this furnace.
Hydraulic tilting system is provided for discharging. More impure copper scrap like Birch, Tinned, Copper made vessels and other such impure copper scrap can refined therein. |
|
Send Your Enquiry
|
Pneumatic Pollution Control Systems With our expertise in the field, we offer the most superior range of pollution control equipments to our clients. These equipments are made after a lot of R&D so that we are able to provide the most efficient range to our customers. High performance, low prices are the most attractive features of these products. We also conduct stringent quality checks to ensure that all the products provide the best results and service to our clients.
We manufacture following devices as given below for our Pollution Control Equipment.
1. Wet Scrubbers
2. Ventury
3. Cyclones
4. Bag House/ Dust Collectors
5. Cooling Coils
6. Ducting & Chimney
7. Suction Blower |
Send Your Enquiry
Hardware And Mill Stores (Trading) Our Trade Business Unit Shree Mill Hards undertakes the trading of all type of hardwares and mill stores like:
1. Nut & Bolts
2. Machine Screws
3. L-key Bolts
4. V-belts
5. Pulley & couplings
6. Bearings
7. Packing & Jointings
8. Cutting & Hand tools
9. Measuring Instruments |
|
Send Your Enquiry
|
|
© Chauhan Group Of Industries & Trade, All Rights Reserved. (Terms of Use)
